Solution to the abnormal interruption of screw stacking machine and stopping operation
- 2019-12-27-

Solution to the abnormal interruption of screw stacking machine and stopping operation

First of all, we must analyze why the screw stacker is interrupted. The possible reasons are as follows:

1. Blockage occurs

2. The voltage is unstable

3. Aging accessories

4. Other reasons: such as manual operation errors or other force majeure factors.

Solution to the abnormal interruption of screw stacking machine and stopping operation

In view of the above situation, the solutions are as follows:

1. When the screw stacking machine is blocked (in general, the screw stacking machine will not be blocked), there is a serious blockage in the pipeline, and the machine may temporarily stop running. At this time, the operation requirements should be in accordance with the operating instructions of the screw stacker, which is suitable for the treatment of fluid mud.

2. If the voltage is unstable, it will also cause abnormal interruption of the screw stacker. In the working conditions of mines, oil fields, etc., the voltage of the screw stacker is unstable, which may cause abnormal power failure. Ensure the stability of the power supply voltage and ensure that the power cord meets the relevant requirements.

3. The aging of the accessories will also affect the operation of the screw stacker, or even interrupt it abnormally. Such as the aging of the reducer or the moving ring has seriously exceeded the working load time.

4. Other man-made operation problems did not follow the training process, causing the screw stacker to be abnormally interrupted. Need to carry out the operation of the screw stacker under the guidance.

In any case, when the screw stacker is interrupted abnormally, the power supply should be cut off immediately. The replacement should be replaced, and the maintenance should be overhauled to ensure that everything is normal before starting work.

Related Industry Knowledge