The dewatering effect of the stacked screw sludge dewatering machine is often tested for timely treatment!
- 2020-08-20-

The dewatering effect of the stacked screw sludge dewatering machine is often tested for timely treatment!


The miniaturization of the screw-type sludge dewatering machine is designed to facilitate tailoring and occupy a small area. The screw stacker has the function of sludge thickening, which can directly treat low-concentration sludge without the need to build a sludge thickening tank, reducing the overall land occupation and construction cost of sewage treatment equipment. Operating cost: The screw stacker has a self-cleaning function, so there is no need to flush with a lot of water to prevent clogging. The screw shaft runs at low speed, the motor power is small, and the power consumption is low. The equipment has a high degree of automation, simple operation, and lower labor costs.


Stacked screw sludge dewatering machine


Cost protection: All equipment is made of 304 stainless steel, which is durable. There are few easy-to-replace parts and low frequency of daily maintenance. When installing the screw stacker, try to keep it level and stable, and fix it with anchor bolts or expansion screws. When a base is installed under the machine, the base should be fixed on the foundation with designated bolts. The filter cake discharging hopper of the screw stacker is set up against the filter cake storage bag or the upper part of the conveying machine as far as possible.


The dewatering effect of the screw sludge dewatering machine is often tested. If the separation liquid (or filtrate) is found to be turbid, the solid recall rate of the screw sludge dewatering machine manufacturer decreases, and the reasons should be analyzed in time and targeted measures should be adopted to deal with it. The dewatering effect of sludge is often observed. If the solid content of the sludge cake decreases, the situation should be analyzed and the specific method should be selected for treatment. The processing capacity of the stacked screw sludge dewatering machine is controlled within an appropriate range, and the sludge flow rate, flocculant flow rate and the difference are adjusted to prevent the system from being frequently shaken and affecting the treatment effect due to the sudden load addition and the equipment overload. Able to achieve larger equipment processing power.


The operation status of the sludge dewatering equipment is often investigated, and the spiral sludge dewatering machine adopts corrective measures to ensure normal operation for abnormal phenomena. Enough flushing time of the screw sludge dewatering machine should be ensured every day. When the screw sludge dewatering machine listens to the machine, the inside and the whole body of the machine should be washed completely to ensure cleanliness and reduce odor. Otherwise, it will be very difficult to flush after the accumulated mud is dry. In accordance with the requirements of the stacked screw sludge dewatering machine, investigations and inspection and protection of the machine are often done. Always pay attention to check the easy-wear condition of the stacked screw sludge dewatering machine, and replace it if necessary.