The belt sludge dewatering machine is composed of a filter belt, a roller pressing cylinder, a filter belt tensioning system, a filter belt deviation adjustment system, a filter belt scouring system and a filter belt drive system. The belt sludge dewatering machine is divided into 4 categories: general-purpose belt sludge dewatering machine, powerful belt sludge dewatering machine, super powerful belt sludge dewatering machine, heavy belt sludge dewatering used in industrial production machine. So how to maintain the belt sludge dewatering machine, let's learn it together.
1. Frequently check the sludge effect of the belt sludge dewatering machine. If the separation liquid (or filtrate) is found to be turbid, the recovery rate of the sludge cake is reduced and the net is severe, the reasons for the shortcomings should be analyzed in time, and targeted methods should be adopted to solve them.
2. Frequently observe the working conditions of the air-controlled pressure gauge. If the pointer of the pressure gauge is unstable, you should analyze the situation in time or shut down immediately to check and clear the shortcomings to prevent a greater loss.
3. Frequently observe the belt typeSludge dewatering machineRegarding the operating conditions of the correction equipment, in response to abnormal phenomena, methods are adopted to ensure that the upper and lower filters are completely stacked and the left and right errors do not exceed five centimeters. The filter should not be too close to the roller side to prevent damage to the filter.
4. Enough flushing time of the belt sludge dewatering machine should be guaranteed every day. When the belt sludge dewatering machine is stopped, the inside (filter) and the whole body of the machine should be washed clean to ensure cleanliness and reduce sludge corrosion. Otherwise, it will not be easy to wash after the accumulated mud is dry, which will affect the application effect and the appearance of the equipment.
5. In accordance with the requirements of the belt sludge dewatering machine operating instructions, conduct frequent observation and maintenance of the machine.
6. Always pay attention to adding lubricating oil to the bearings of various parts of the belt sludge dewatering machine to extend the service life of the bearings, and replace them when necessary.
7. Timely discover the sand particles and iron nails in the mud that the belt sludge dewatering machine enters to prevent foreign matter from damaging the filter belt. When the damage is severe, you should repair it in time to ensure your effect.
8. The operator should make a record of the work of the belt sludge dewatering machine, so as to inform the operator to understand the operation of the general equipment when changing shifts.
- Introduction to the use characteristics of sewage purification vehicles
- Precautions for operation of laminated sludge dewatering machine
- Selection standard of sludge dewatering machine
- The processing method of the fixed ring of the ring piece of the screw stacking machine
- How to adjust the high water content of the stacked screw sludge dewatering machine
- What does the settling time of the snail sludge dewatering machine depend on?
- Correct use of screw stacking machine
- What is the processing effect of the screw stacking machine?
- Precautions for the safe use of stacked screw sludge dewatering machine
- The difference between traditional septic tank cleaning and sewage suction purification truck cleaning
- The stack screw type sludge dewatering machine manufacturer tells you what determines the price of water treatment
- Setting of mixing device of stacked screw sludge dewatering machine
- Advantages of sewage purification vehicle
- What aspects should be paid attention to when choosing a snail dehydrator
- What are the advantages of the stacked screw sludge dewatering machine?
- Comparison of printing and dyeing stacked screw sludge dewatering machine and traditional mud press
- Common sludge classification of vehicle-mounted sludge dewatering truck
- Why is the stacked screw sludge dewatering machine favored by small sewage treatment plants?
- How to make the filter cloth deviation of belt sludge dewatering machine
- The feeding of the screw stacker should be evenly distributed to avoid excessive work